TriCare is up front in dedicating considerable resources to achieving sustainable development and environmental protection objectives. Confirmation of this is provided by all the company production sites having obtained ISO 9001 quality certification and ISO 14001 environmental management system certifications.

Tricare 2.0G is completely different in LV switchboards and one of its kind. We have design our product in such a way that it has all the latest features and compatibilities along with flexibilities to adopt customer requirements as well. Our Switchboard is completely Modular, Welding less construction, made of GI Sheet, all internal parts does not required any Chemical OR painting process which safes the environment, life of our team associates and also increases the life of switchboard up to 20 Years. IP Protection up to 55 can be achieved which protect the all internal electrical equipment to work safely and does not allow any foreign particle to enter inside the enclosure.

Construction Highlights

  • 100% modular structure design.
  • Flexible Horizontal / Vertical Bus bar and Cable compartments configuration.
  • Compartmentalized up to Form 4.
  • Ingress Protection Up to IP 55
  • Flexible Compartment sizes starts from 200mm up to 2000mm in multiple of 100mm.
  • Panel can be expendable in all 3 Directions and bayed together.
  • Standard colour shades. SIEMENS Grey RAL 7035 for all doors, covers, Top &
  • Bottom. Black RAL 9000 for Base Channel.
  • All Internal Partitions, Trays, Segregations, Channels etc. will be without paint, made of GI Sheet with 275 GSM coating.
  • Welding less construction
  • Fully Folded design
  • Kit form Structure
  • Standard Compartment sizes.
  • Possibility of changes is very easy and adaptable.

Benefits of the modifications in the design

Due to the modifications, the TriCare 2.0G Panels immensely reduces the time taken in the process of manufacturing of every unit, which makes the delivery time shorter as compared to the conventional LT Panels. The risk involved in welding process and the possibility of weak joints due the improper joints are also eliminated completely. The cost and the time involved in the process of unpainted area is also saved. The toxic emission to the nature and wastage is also reduced to a considerable amount.

GTP for the panel

S. No. Panel Part Material Remark
1 Main frame (load bearing) GI sheet 2 mm
2 Corner Block ADC
3 Functional Frame (load bearing) GI sheet 1.6 mm
4 Inner partitions GI sheet 1.6 mm
5 Internal/external Gland Plate GI sheet 3 mm
6 Side Panel Covers CRCA sheet 1.6 mm
7 Rear Cover and front door CRCA sheet 1.6 mm
8 Base Frame-Plinth ISMC Channel 75 mm X 40 mm
9 Gasket PU 7 mm X 10 mm
  • Powder paint will be used on all outer covers with Texture finishing and minimum 400 Hours UV Life.
  • Panel shall be tested for 96 Hours Salt spray test and life will be more than 600 Hours.

Tests and Compliances of the Panel

  • Tricare 2.0G will be in compliance of latest IEC Standard requirement such as IEC 61439-1 & 2, IEC 61641, IEC 62262 etc.
  • The list of tests along with their IEC 61439-1 Clause is as follows:

Construction

  • Clause 10.2: Strength of material and parts.
  • Clause 10.2.2: Resistance to corrosion.
  • Clause 10.2.3: Properties of insulation materials.
  • Clause 10.2.7: Markings
  • Clause 10.3: Degree of protection of enclosures.
  • Clause 10.4: Clearances and creepage distances.
  • Clause 10.5: Protection against electric shock and integrity of protective circuits.
  • Clause 10.6: Incorporation of switching devices and components.
  • Clause 10.7: Internal electric circuits and connections.
  • Clause 10.8: Terminals for external conductors

Performance

  • Clause 10.9: Dielectric properties.
  • Clause 10.10: Temperature rise.
  • Clause 10.11: Short circuit withstand strength.
  • Clause 10.13: Mechanical Operation.
  • Seismic Test Compliance as per IEC61641